Interaction Diagram of Hollow-Crossed Reinforced Concrete Columns Undergoing Biaxial Bending Using the Closed Polygon Method
DOI:
https://doi.org/10.20884/1.dinarek.2025.21.1.103Keywords:
Interaction Diagram, hollow column cross-section, closed polygon methodAbstract
Design of reinforced concrete columns in certain conditions requires a hollow cross-section for plumbing lines and cable lines. This hollow cross-section requires more careful analysis calculations. Because construction planning practices are more complicated if always calculated manually. So this study aims to develop a universal analysis calculation method regarding the interaction diagram of hollow columns using a computer program. Column strength analysis uses the strain compatibility method. Analysis of cross-section properties uses the closed polygon geometry method. Where the vertex points of the cross-section polygon are labeled numerically. The numbering of the exterior boundary vertex points is arranged in the order following the counterclockwise direction, while the internal boundary is arranged in the order of the clockwise direction. The calculation results of this method are compared with the calculation results of the PCA-COL program in the case of the same column. The results of the NMSE performance index test for 3 models are distinguished by 3 different cross-section rotation angles, each 00, 300, and 450. For the axial force capacity of the 3 models, the respective NMSE performance indexes are obtained; 0.0000212066, 0.0000244858, 0.0000300786. While the NMSE performance index test for the bending moment capacity of the 3 models was obtained; 0.045109796, 0.048488446, 0.04994925. All the results are close to zero, so the calculation method has high accuracy.
Downloads
References
A. A. Ibraheem and Y. G. Pronina, "On Optimal Design of Reinforced Concrete Columns Subjected to Combined Biaxial Bending and Axial Load," *Vestnik of Saint Petersburg University, Applied Mathematics, Computer Science, Control Processes*, vol. 18, no. 2, pp. 218-230, 2022.
A. Al-Ansari, "Simplified Irregular Column Analysis by Equivalent Square Method," *Journal of Structural Engineering & Applied Mechanics*, vol. 2, no. 1, pp. 36-46, 2019.
American Concrete Institute (ACI), *Building Code Requirements for Structural Concrete (ACI 318-19), Commentary on Building Code Requirements for Structural Concrete (ACI 318R-19)*. Farmington Hills, MI, USA: ACI, 2019.
Badan Pertanahan Nasional (BPN), *Bahan Ajar On The Job Training Penggunaan Alat Total Station*. Direktorat Pengukuran Dasar, Deputi Bidang Survei Pengukuran dan Pemetaan, Badan Pertanahan Nasional Republik Indonesia, 2011.
Badan Standarisasi Nasional (BSN), *SNI-2847-2019 Persyaratan Beton Struktural untuk Bangunan*. Jakarta, Indonesia, 2019.
A. M. A. E. Fattah and H. A. Ahmed, "Partial Confinement Utilization for Rectangular Concrete Columns Subjected to Biaxial Bending and Axial Compression," *International Journal of Concrete Structures and Materials*, vol. 11, no. 1, pp. 135-149, Mar. 2017.
E. Greulich and F. Francis, "Accurate Polygon Centroid Computation Using ARC/INFO GIS," *Journal of Computing in Civil Engineering*, vol. 9, pp. 88-89, 1995.
M. A. Ghoneim and T. E. Mahmoud, *Design of Reinforced Concrete Structures*, vol. 2. Cairo, Egypt: Cairo University, 2008.
Ö. Helgason and V. Valdimar, "Development of a Computer Program to Design Concrete Columns for Biaxial Moments and Normal Force," Division of Structural Engineering, Lund Institute of Technology, Sweden, 2010.
R. Hulse and W. H. Mosley, *Reinforced Concrete Design by Computer*. Houndmills, Basingstoke, Hampshire, RG21 2XS, UK: Macmillan Education Ltd., 1986.
K. H. Kwan and T. C. Liauw, "Computerized Ultimate Strength Analysis of Reinforced Concrete Section Subjected to Axial Compression and Biaxial Bending," *Journal of Computers & Structures*, vol. 21, no. 6, pp. 1119-1127, 1985.
J. Marin, "Computing Columns, Footings and Gates Through Moments of Area," *Computers & Structures*, vol. 18, no. 2, pp. 343-349, 1984. Instituto de Materiales Modelos Estructurales, IMME, Universidad Central de Venezuela, Caracas, Venezuela.
A. A. Poli and C. C. Mario, "On the Use of the Normalized Mean Square Error in Evaluating Dispersion Model Performance," *Atmospheric Environment*, vol. 27A, no. 15, pp. 2427-2434, 1993.
Portland Cement Association (PCA), *PCACOL Strength Design of Reinforced Concrete Column Section*. Skokie, IL, USA: PCA, 1992.
A. Ranjbaran, "A Computer Model for the Analysis of Masonry Columns," *Journal of Computers & Structures*, vol. 55, no. 3, pp. 543-551, 1995. Department of Civil Engineering, UMIST, PO Box 88, Manchester M60 IQD, UK.
J. K. Wight, *Reinforced Concrete Mechanics and Design*, Global ed. Edinburgh Gate, Harlow, Essex CM20 2JE, England: Pearson Education Ltd., 2016.
Structurepoint-LLC, *spColumnmanual.pdf*. [Online].Available:https://structurepoint.org/pdfs/manuals/spColumn-manual.pdf. [Accessed: Jul. 29, 2024].
